HC-SR04 ultrasonic sensor test

 

HC-SR04 merupakan sensor ultrasonic untuk mendeteksi jarak.

spesifikasi:

voltase :5V DC (high), 0V DC (low)
arus kerja : <2mA
sudut efektif: <15°
jarak efektif : 2cm – 500 cm
ketelitian : 0.3 cm

jumlah pin 4 buah, yaitu VCC,TRIG,ECHO,GND

Untuk melakukan test pada HC-SR04 kita buat rangkain sebagai berikut:

kemudian kita download program pada arduino:

/*
HC-SR04 Ping distance sensor]
VCC to arduino 5v GND to arduino GND
Echo to Arduino pin 13 Trig to Arduino pin 12
Red POS to Arduino pin 11
Green POS to Arduino pin 10
560 ohm resistor to both LED NEG and GRD power rail
More info at: http://goo.gl/kJ8Gl
Original code improvements to the Ping sketch sourced from Trollmaker.com
Some code and wiring inspired by http://en.wikiversity.org/wiki/User:Dstaub/robotcar
*/

#define trigPin 13
#define echoPin 12
#define led 11
#define led2 10

void setup() {
  Serial.begin (9600);
  pinMode(trigPin, OUTPUT);
  pinMode(echoPin, INPUT);
  pinMode(led, OUTPUT);
  pinMode(led2, OUTPUT);
}

void loop() {
  long duration, distance;
  digitalWrite(trigPin, LOW);  // Added this line
  delayMicroseconds(2); // Added this line
  digitalWrite(trigPin, HIGH);
//  delayMicroseconds(1000); - Removed this line
  delayMicroseconds(10); // Added this line
  digitalWrite(trigPin, LOW);
  duration = pulseIn(echoPin, HIGH);
  distance = (duration/2) / 29.1;
  if (distance < 4) {  // This is where the LED On/Off happens
    digitalWrite(led,HIGH); // When the Red condition is met, the Green LED should turn off
  digitalWrite(led2,LOW);
}
  else {
    digitalWrite(led,LOW);
    digitalWrite(led2,HIGH);
  }
  if (distance >= 200 || distance <= 0){
    Serial.println("Out of range");
  }
  else {
    Serial.print(distance);
    Serial.println(" cm");
  }
  delay(500);
}

 

Untuk mengetahui jarak pengukuran kita hubungkan arduino dengan komputer menggunakan kabel usb kemudian pilih menu serial monitor pada software arduino.

 

video hasil pengujian: